Infrared Transmission: The IR Menu

IR Communication

Still pictures can be copied from the camera to any device that supports high-speed infrared or Ir- Simple. The camera can receive still pictures from devices that support high-speed infrared or IrSim- pleShot™ (IRSS™). Before sharing pictures, match the tIR COMMUNICATION option in the camera setup menu to the infrared transmission type used by the other device (pg. 83). For details, see the manual provided with the device.

To share pictures, place the camera about 5 to 20 cm (2 to 8 in.) from the other device with the infrared ports pointing directly at each other. The ports should be at no more than a 15 ° angle. Be sure both devices are on.

Maximum angle: approximately 15 °

Caution

Make sure that there are no obstacles between the two devices and that the infrared ports are correctly aligned and are not in direct sunlight or directly under a fl uorescent light. Remote controls and other infrared devices and equipment that generates electrical noise may interfere with transmission.

Connections

57