Inserting a Memory Card

Removing Memory Cards

Be sure the camera is off before opening the battery- chamber cover. Press the card in and then release it slowly. The card can now be removed by hand.

Cautions

The memory card may spring out if you remove your finger immediately after pushing the card in.

Memory cards may be warm to the touch after being removed from the camera. This is normal and does not indicate a malfunction.

Cautions

Format SD memory cards before first use, and be sure to reformat all memory cards after using them in a computer or other device. For more information on formatting memory cards, see page 76.

Memory cards are small and can be swallowed; keep out of reach of children. If a child swallows a memory card, seek medical assistance immediately.

Do not use miniSD or microSD adapters that expose the back of the card. Failure to observe this precaution may cause damage or malfunction. Adapters that are larger or smaller than the standard dimensions of an SD card may not eject normally; if the card does not eject, take the camera to an authorized service representative. Do not forcibly remove the card.

Do not turn the camera off or remove the memory card while the memory card is being formatted or data are being recorded to or deleted from the card. Failure to observe this precaution could damage the card.

Do not affix labels to memory cards. Peeling labels can cause camera malfunction.

Movie recording may be interrupted with some types of SD memory card.

Steps First

11