INSTALLATION
1. PREPARATION
WARNING
•If the range hood is not installed properly, it could become detached and fall.
•Ensure that the metal duct does not touch other metal housing materials, otherwise fire or electric shock could result.
1 This range hood is designed to discharge upward. For vertical discharge, run duct work between the hood location and roof cap location.
To get the best result, use a minimum number of transitions and elbows. Be sure to attach a roof cap to avoid leaking rain in the end.
2 The range hood unit must be mounted to a liner which has the following dimensions. Install the liner securely after checking that the opening size of the liner is the same as the figure below.
CAUTION |
The liner should be installed tightly. If the liner installation is not correct, the range hood unit may become detached and fall.
6
