■Replacement of display
If the display is replaced with a different type (especially with an LCD), a display error such as a blank screen may occur. In this case, replace the display as follows:
For Windows 95/98/Me model
1Set the resolution to 640 x 480 (the setting before replacement).
2Set the refresh rate to “Adapter default” or “Adapter standard”.
3Close Windows, turn the PC unit off, and replace the display.
If nothing appears or some resolutions are unavailable after the display is replaced without the above setting, reinstall the display driver as follows:
1Start Windows in the Safe mode.
2Set the graphic adapter to “Standard VGA” and restart Windows.
3Reinstall the display driver.
For Windows NT model
1Turn the PC off and replace the display.
2Start the PC with Windows NT Workstation Version 4.00 [VGA mode].
3Set the resolution, number of colors, and refresh rate in accordance with the display specifications, and restart the PC.
For Windows 2000 model
1Set the resolution to 640 x 480.
2Set the refresh rate to 60Hz.
3Close Windows, turn the PC unit off, and replace the display.
If nothing appears or some resolutions are unavailable after the display is replaced without the
above setting, reinstall the display driver as follows:
1Start Windows with “VGA mode” enabled.
2Reinstall the display driver.
60
