Fujitsu A3040 manual Primary Master Submenu of the Main Menu, Device, Vendor

L i f e B o o k A S e r i e s N o t e b o o k B I O S

Primary Master Submenu of the Main Menu

The Primary Master submenu identifies the characteristics of the Primary Master device installed.

					BIOS SETUP UTILITY
		Main
		Primary Master:					Select ATA/ATAPI drive
		Device		:Hard Disk			installed here.
		Vendor		:TOSHIBA MK8025GAS			[Auto]
		Maximum Capacity :80.0GB					The BIOS auto-types the
		LBA Mode		:Supported			drive on boot time.
		Block Mode		:16Sectors
		PIO Mode		:4			[None]
		Async DMA		:MultiWord DMA-2			The drive is disabled.
		Ultra DMA		:Ultra DMA-5
		S.M.A.R.T.		:Supported
		Type			[Auto]
							F1: Help	Esc: Exit
			v02.59 (C) Copyright 1985-2006, American Megatrends, Inc.
					Figure 2. Primary Master Submenu
Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu
Menu Field		Options			Default	Description
Type:		■	Auto		[Auto]	Selects the ATA/ATAPI device type. To change the selection, press
		■	None			the spacebar. Select Auto to have the type automatically identified
						by the BIOS at POST. If None is selected, all of the following Set-up
						items do not appear.
■	Device				–—	These items are automatically determined by the system at POST
	Vendor					and display the characteristics of the Primary Master device. They
■						cannot be changed by the user.
■	Maximum capacity
■	LBA Mode
■	Block Mode
■	PIO Mode
■	Async DMA
■	Ultra DMA
■	S.M.A.R.T

6