Fujitsu A3110 manual Exit Menu - Leaving The Setup Utility, Main Advanced Security Boot Info Exit

L i f e B o o k A S e r i e s B I O S

EXIT MENU – LEAVING THE SETUP UTILITY

The Exit Menu is used to leave the setup utility. Follow the instructions for Navigating Through the Setup Utility to make any changes. (See Navigating through the Setup Utility on page 2 for more information.)

The following table shows the names of the menu fields for the Exit menu, the default settings and a description of the field's function and any special information needed to help understand the field's use.

BIOS Setup Utility

Main Advanced Security Boot Info Exit

Exit Saving Changes

Exit Discarding Changes

Load Setup Defaults

Discard Changes

Save Changes

Save Changes and Power Off

Exit System Setup and save your changes to CMOS.

vv

v02.59 (C)Copyright 1985-2006, American Megatrends, Inc.

Figure 18. Exit Menu

Table 18: Fields, Options and Defaults for the Exit Menu

Menu Field	Description
Exit Saving	Exit Saving Changes and Exit will store all the entries on every menu of the setup utility to the BIOS
Changes	memory, then exit the utility. A confirmation message Save Configuration changes and
	exit now? [Yes][No] is displayed.
Exit Discarding	Selecting Exit Discarding Changes and Exit will exit the setup utility with out writing to the BIOS
Changes	memory. When the BIOS recognizes this selection it will load the operating system and begin opera-
	tion.
Load Setup	Selecting Load Setup Defaults will load the factory preset default values for all menu fields, then dis-
Defaults	play the message Load default configuration now? [Yes] [No]. When confirmed the
	setup utility will return to the Exit Menu. To return to another menu follow the directions in the Nav-
	igating Through the Setup Utility Section.

30