Fujitsu B-2566, B-2562 manual W e r M e n u

P o w e r M e n u

Table 16: Fields, Options and Defaults for the Power Menu (for APM operating systems only)

Menu field	Options	Default	Description
Power Savings:	• Disabled	[Customized]	Sets the power savings parameters to a factory installed
	• Customized		combination of parameters, a custom set of parameters set
	• Maximum		by you or no power saving features.
	Power Savings
	• Maximum
	Performance
Hard Disk	• Off	[Off]	Sets the length of time that the hard drive can be inactive before your note-
Timeout:	• 30 seconds to		book automatically turns off the power to the hard drive controller and drive
	20 Minutes		motor. If you choose a factory installed combination of parameters this field
			will display the setting. If you choose to customize the parameters you will
			be able to set this yourself. The options available vary from Off, which has
			no inactivity shutoff, to 20 minutes.
Display	• Off	[Off]	Sets the length of time without any user input device activity before the
Timeout:	• 2 to 20 Minutes		display is turned off. If you choose a factory combination of parameters, this
			field will display the setting. If you choose to customize the parameters, you
			will be able to set this yourself. Off has no inactivity shutoff.
Standby	• Off	[4 Minutes]	Sets the length of time without any user input device activity before the CPU
Timeout:	• 1 to 16 Minutes		is set to half speed and the display and the hard drive are turned off. If you
			choose a factory combination of parameters this field will display the setting.
			If you choose to customize the parameters you will be able to set it yourself.
Auto Suspend	• Off	[15 Minutes]	Sets the length of time without any I/O activity before your note-book goes
Timeout:	• 5 to 60 minutes		into Suspend mode. If you choose a factory combination of parameters this
			field will display that setting. If you choose to customize the parameters you
			will be able to set this yourself. Off has no inactivity suspension.
Suspend	• Suspend	[Suspend]	Sets the form of suspension state. If you choose Suspend, you will suspend
Mode:	• Save to Disk*		operation with power to system memory, and everything else powered
			down or in a very low power state. If you choose Save-to-Disk your note-
	*To use Save to		book will save all of system memory and the operating parameters to the
	Disk automatically		hard drive before turning your notebook to the pseudo-off condition.
	in Windows 98, set
	Suspend Mode to
	Save to Disk mode.
Auto Save	• Off	[Off]	When set to “After 1 Hour”, your notebook will automatically save all
to Disk:	• After 1 Hour		system memory and the operating parameters to the hard drive and go to
			pseudo-off if the notebook is left in Suspend mode for more than an hour.
Resume On	• Off	[Off]	Sets whether or not to Resume from a suspension state when a message is
Modem Ring:	• On		received by telephone line. This feature will not operate if the Save-to-Disk
			mode is enabled. This feature applies to internal and external modems.
Resume On	• Off	[Off]	Sets whether or not to resume from a suspension state at a designated time.
Time:	• On		This feature is available from either the Suspend or Save-to-Disk modes.
Resume Time:	–—	[00:00:00]	Sets the designated time, on a 24-hour clock, when the notebook is to auto-
			matically resume operation from the Suspend state. The format of the clock
			setting is hours:minutes:seconds. Each segment of the time is set separately,
			either by incrementing or by typing in the numbers. You move between the
			segments with the [Tab] key or the [Shift]+[Tab] keys. This only applies
			when Resume on Time is set to On.
Advanced	–—	–—	When selected, opens the Advanced Features submenu which allows
Features:			setting additional power saving parameters.

27