Fujitsu C122-E119EN - page 30

Item Description

Noise [dB] (Included in main

unit specifications)

Acoustic power level [B] (Included in main

unit specifications)

Allowable vibration

[m/s2 (gal)]

Operating (including standby state) 4.0 (400) (synthetic

seismic waves)

Non-operating (*6) 10.0

(1000) (synthetic

seismic waves)

Allowable dust concentration [mg/m3] 0.15

Power requirements Input voltage and number of phases 200 to 240

VAC ±10%

100 to 120

VAC ±10%

1φ

Frequency and fluctuation range 50/60 Hz +2/-4%

Maximum power

consumption/

apparent power

Operating Input voltage: 200 V 450 W / 475 VA

Input voltage: 100 V 460 W / 485 VA

Standby

Input voltage: 200 V 10 W / 40 VA

Input voltage: 100 V 10 W / 35 VA

Power factor (*7) 0.95 or more

Rush current [A] (Inrush time) (*8) 25 or less

Leakage current [mA] (*9) 3.5 or less

*1 The dimensions do not include protrusions.

*2 The values are for the device with all options installed.

However, the values do not include the weight of mounted rack-mount rails (7 kg) and cables.

*3 If the intake air temperature is high (but within the normal temperature range), the fan enters high-speed mode

even when operation is normal.

*4 Condensation is not permitted.

*5 The temperature requirements depend on the altitude at the installation site.

- Installation at 0 to 500 m (0 to 1640 ft.) above sea level: 5 to 35°C (41 to 95.0°F)

- Installation at 500 to 1000 m (1640 to 3281 ft.) above sea level: 5 to 34°C (41 to 93.2°F)

- Installation at 1000 to 1500 m (3281 to 4921 ft.) above sea level: 5 to 33°C (41 to 91.4°F)

- Installation at 1500 to 3000 m (4921 to 9843 ft.) above sea level: 5 to 30°C (41 to 86.0°F)

The altitude specifications for the installation site include an allowable margin of error of ±100 m.

*6 "Non-operating" refers to the condition where a device has been disconnected from the power supply and stored.

*7 This is the value during operation.

*8 This value is for a single input cable.

*9 This value is for a single device.

PRIMEQUEST 1000 Series Hardware Installation Manual

CHAPTER 1 Installation Information

10 C122-H004-07EN

Contents

Main Page Preface For Safe Operation How to use this manual About this product Storage of accessories Organization of this manual Manuals for the PRIMEQUEST 1000 series Related manuals Page Abbreviations Notation Notation for the CLI (command line interface) Command syntax Notes on notations Alert messages Alert messages in the text Product operating environment Note Safety Precautions List of important alert items Warning labels Page Notes on Handling the Product Adding optional products Maintenance Modifying or recycling the product Note on erasing data from hard disks when disposing of the product or transferring it Support and service SupportDesk (available only in Japan, for a fee) Product and service inquiries Revision History Contents Page Figures Page Tables Page CHAPTER 1 Installation Information 1.1 Device Configuration Details 1.2 Outline Drawings of the Devices 1.2.1 PRIMEQUEST 1800E2/1800E outline drawings PRIMEQUEST 1800E2/1800E (front view) PRIMEQUEST 1800E2/1800E (rear view) 1.2.2 PCI_Box outline drawings Page 1.3 Installation Specifications 1.3.1 PRIMEQUEST 1800E2 installation specifications 1.3.2 PRIMEQUEST 1800E installation specifications Page 1.3.3 PCI_Box installation specifications Page 1.4 Installation Area Page Page 1.5 Cooling and Exhaust Air Flows in the Devices 1.5.1 Cooling and exhaust air flows in the PRIMEQUEST 1800E2/1800E 1.5.2 Cooling and exhaust air flows in the PCI_Box 1.6 Installation Environment 1.6.1 Dust Airborne dust Removing dust 1.6.2 Corrosive gases 1.6.3 Seawater (salt damage) Page CHAPTER 2 Connection Information 2.1 Overview of Connections 2.1.1 Overview of Connections (PRIMEQUEST 1800E2) 2.1.2 Overview of Connections (PRIMEQUEST 1800E) Page 2.2 Signal Cable Connections 2.2.1 Basic interfaces and peripheral devices (PRIMEQUEST 1800E2) Cable connection diagram (PRIMEQUEST 1800E2) List of cables 2.2.2 Basic interfaces and peripheral devices (PRIMEQUEST 1800E) Cable connection diagram List of cables Page 2.2.3 External interface connectors in detail External interface connectors in the PRIMEQUEST 1800E2/1800E main unit Page Page Page 2.3 Power Cable Connections 2.3.1 Power cable connections of the PRIMEQUEST 1800E2/1800E Standard configuration (primary power feed, no redundant power supply) Redundant power supply configuration (primary power feed, redundant power supply) Dual power feed configuration 2.3.2 Power cable connections of the PCI_Box 200 to 240 V standard configuration (primary power feed, no redundant power supply) 200 to 240 V redundant power supply configuration (primary power feed, redundant power supply) 200 to 240 V dual power feed configuration 100 to 120 V configuration (primary power feed, no redundant power supply) 100 to 120 V redundant power supply configuration (primary power feed, redundant power supply) 2.4 Input Power Connection Specifications 2.4.1 PRIMEQUEST 1000 series main unit 2.4.2 PCI_Box 2.4.3 Connections between the power distribution box and distribution panel 2.5 Power Cable Connections under a Raised Floor (Except in Europe) Page Page Page 3.1 Elevator Load Conditions 3.2 Earthquake Preparedness Measures Page Page A.1 Rack Mounting A.1.1 Arrangements for installation work Page Page A.2 Rack Mounting Requirements A.2.1 Requirements for mounting in a Fujitsu 19-inch rack Recommended racks for mounting Rack mounting requirements Page Page Page Page A.2.2 Requirements for mounting in a rack manufactured by another company Conditions of rack depth Conditions regarding rack posts Other conditions A.3 Fujitsu 19-inch Racks A.3.1 Types of 19-inch rack Page A.3.2 Outline drawings of 19-inch racks 19-inch rack Model 1740 (base/with stabilizer) Page Page Page 19-inch rack Model 1740 (expansion/without stabilizer) 19-inch rack Model 1640 (base/with stabilizer) 19-inch rack Model 1640 (base/without stabilizer) 19-inch rack Model 1640 (expansion/with stabilizer) Page 19-inch rack Model 1640 (expansion/without stabilizer) 19-inch rack Model 1624 (base/with stabilizer) 19-inch rack Model 1624 (base/without stabilizer) 19-inch rack Model 1624 (expansion/with stabilizer) Page 19-inch rack Model 1624 (expansion/without stabilizer) A.3.3 Bottom view drawings of 19-inch racks Page Page Page Bottom view drawing of connected 19-inch racks (slim) Page Page B.1 Overview Page B.3 Connection of Main Unit and CVCF and Signal Line Definitions Page B.4 Cable Connector Connector type Pin assignment Index