Fujitsu C2330 manual Menu Field, Options, Default, Description

M a i n M e n u

Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu

Menu Field	Options	Default	Description
Sectors:	• A number	–—	This appears only when Hard Disk is selected. When it is selected,
	between		you can change the value. This field is incremented by pressing the
	0 and 63		[Spacebar]. This field is decremented by pressing the [-] key. The
			field can also be changed by typing in the number.
Maximum	• Display only	–—	Displays the maximum capacity of the drive calculated from the
Capacity:			parameters of the hard disk when Hard Disk is selected.
LBA Format (Logical Block Addressing)
Total Sectors:	–—	–—	The total number of sectors on your hard disk.
Maximum	–—	–—	The maximum capacity of your hard disk.
Capacity
CHS and LBA Formats
Multi-Sector	• Disabled	[16 Sectors]	This option cannot be changed when Auto is selected. Specify the
Transfers:	• 2 Sectors		number of sectors per block for multiple sector transfer.
	• 4 Sectors
	• 8 Sectors
	• 16 Sectors
LBA Mode	• Disabled	[Enabled]	Enables or disables Logical Block Addressing in place of Cylinder,
Control:	• Enabled		Head, Sector addressing. This can’t be changed when Auto is
			selected.
Transfer	• Standard	[Multiword	Selects the method for moving data to/from the drive. Autotype the
Mode:	• Fast PIO 1	DMA 2]	drive to select the optimum transfer mode. This option cannot be
	• Fast PIO 2		changed when Auto is selected.
	• Fast PIO 3
	• Fast PIO 4
	• Multiword DMA 1
	• Multiword DMA 2
Ultra DMA	• Disabled	[Disabled]	Selects the method for moving data to/from the drive. Autotype the
Mode:	• Mode 0		drive to select the optimum transfer mode. This option cannot be
	• Mode 1		changed when Auto is selected.
	• Mode 2
	• Mode 3
	• Mode 4
	• Mode 5

A bootable CD-ROM may have a floppy disk format or a hard drive format. When the bootable CD-ROM is used, the drive allocations change automatically without changing the BIOS setup. If a floppy disk format CD-ROM is used, the CD-ROM becomes Drive A. The CD-ROM will only take Drive C: (hard drive format) if the internal hard drive is not present or is disabled. The bootable CD-ROM can never use a C: designation if a formatted internal hard drive is present, since the C: designator is always reserved for the internal hard drive. The boot sequence ignores the new drive designations, but your application software will use the new designations.

Be careful of the operating environment when booting from a CD-ROM or you may overwrite files by mistake.

7