Introduction
i | Depending on the configuration chosen, some of the hardware components described |
may not be available on your system board. |
You will find further information in the "BIOS Setup" description.
Further information about drivers is provided in the readme files on the hard disk, on the supplied drivers diskettes, on the "Drivers & Utilities" or on the "ServerStart" CD.
Notational conventions
The meanings of the symbols and fonts used in this manual are as follows:
!
i
Pay particular attention to text marked with this symbol. Failure to observe this warning endangers your life, destroys the device, or may lead to loss of data.
Supplementary information, remarks, and tips follow this symbol.
ÊText which follows this symbol describes activities that must be performed in the order shown.
ËThis symbol indicates that you must enter a blank space (press the Space Bar) at this point.
ÚThis symbol indicates that you must press the Enter key.
Text in this typeface indicates screen outputs.
Text in this bold typeface indicates the entries you make via the keyboard.
Text in italics indicates commands or menu items.
"Quotation marks" indicate names of chapters or terms.
Important notes
Store this manual close to the device. If you pass the device on to third parties, you should pass this manual on with it.
! | Be sure to read this page carefully and note the information before you open the device. |
You cannot access the system board components without first opening the device. How | |
| to dismantle and reassemble the device is described in the Operating Manual |
| accompanying the device. |
| Please observe the safety information provided in the "Important notes" chapter in the |
| device's operating manual. |
| Incorrect replacement of the lithium battery may lead to a risk of explosion. It is therefore |
| essential to observe the instructions in the |
| battery" section. |
English - 1 |
