Fujitsu E8020D manual Hard Disk Security Submenu of the Security Menu

L i f e B o o k E S e r i e s B I O S

Hard Disk Security Submenu of the Security Menu

The Hard Disk Security submenu is for configuring hard disk security features.

		PhoenixBIOS Setup Utility
Main	Advanced	Security	Power Savings	Exit
	Hard Disk Security			Item Specific Help
Serial ATA Port 0 Password Is: Clear
Primary Master Password Is:			Not Available
*Set Serial ATA Port 0 Password			[Enter]
Set Primary Master Password:			[Enter]
Password Entry on Boot:			[Enabled]
*Hard Disk Password can not be set nor changed
if the system is rebooted from OS. Choose "Save
Changes and Power Off" in Exit Menu to shutdown
the system, then Hard Disk Password can be set
or changed on next boot.

F1 Help	Select	Item
ESC Exit	Select	Menu

-/Space	Change	Values
Enter	Select	▲ Sub-Menu

F9 Setup Defaults

F10 Save and Exit

Figure 14. Hard Disk Security Submenu

Table 14: Fields, Options and Defaults for the Hard Disk Security Submenu of the Security Menu

Menu Field	Options		Default	Description
Serial ATA Port 0	___		Clear	Display-only. Default is Clear. When the Primary Master Password has been set, the
Password Is:				field changes to Set. When this password is set, the primary hard disk drive cannot
				be used in another system unless the password is entered.
Primary Master	___		Not	Display-only. Default is Not Available. When Secondary Master Password has been
Password Is:			Available	set, the field changes to Set. When this password is set, the secondary (modular)
				hard disk drive cannot be used in another system unless the password is entered.
Set Serial ATA Port	___		[Enter]	Sets, changes or cancels the Serial ATA Port 0 Password. The Serial ATA Port 0 Pass-
0 Password:				word may be up to seven characters long and must include only letters or numbers
				(no symbols). Passwords are NOT case-sensitive. When a Serial ATA Port 0 Pass-
				word is set, it must be used to access the hard drive if it is used in another system.
				Note that the password will not take effect until the system has been rebooted.
				Note that the hard disk password cannot be set or changed if the system is rebooted
				from the OS. Choose “Save Changes and Power Off” in the Exit menu to shut
				down the system, then the password can be set or changed on the next boot.
Set Primary	___		[Enter]	Sets, changes or cancels the Primary Master Password. The Primary Master Pass-
Master Password:				word may be up to seven characters long and must include only letters or numbers
				(no symbols). Passwords are NOT case-sensitive. When a Primary Master Password
				is set, it must be used to access the modular hard drive if it is used in another system.
				Note that the password will not take effect until the system has been rebooted.
Password Entry on	■	Disabled	[Enabled]	When set to disabled, entry of a Hard Disk Password is not required before OS boot.
Boot:	■	Enabled		(The hard disk is still password-protected without password entry.)

22