To install your Tablet PC into the bump case, position the case face down as shown in Figure 3. Open the side flap of the case. The flap is secured by a long strip of Velcro® that is attached to the back of the bump case. Note that the left side of the case is open for port access, but the system cannot be inserted or removed from that side.
System with high-capacity battery installed:
Remove the foam bumper that is attached to the Velcro strip on the flap prior to installing a system with a high capacity battery. Retain the bumper for when you use the system with a main battery.
Slide the system into the bump case, with the screen facing the open window. (See Figure 3). Reattach the flap to the side of the case.
Battery strap
Bump case | Tablet PC | |
(rear, with side flap open) | ||
|
Figure 3. Inserting Tablet PC into Bump Case
4
