Fujitsu FPCCR05 manual Wall-mount Screw Dimensions

4.Attach four screws (sheet metal, #14 panhead, zinc- plated recommended, or equivalent) to the wall as shown in Figure 7. The screw heads should extend from the wall approximately 0.25”.

12.25" (311.0 mm)

4.26" (108.0 mm)

Figure 7. Wall-mount Screw Dimensions

5.Align the wall-mount holes on the cradle (Figure 6) with the mounting screws so that the screw heads extend into the round portions of the wall-mount holes. (Figure 8)

Slotted portion

Round portion

Figure 8. Wall-mount Hole

6.When the four screw heads are aligned, press the cradle firmly against the wall and slide it to the right and downwards, so that the screws move to the top of the slotted portion of the holes, locking it in place.

7