Fujitsu FTP-621DCL012, FTP-621MCL301, FTP-621MCL302 manual VDC ± 5%, average*2 25 1.29 a at

FTP-621MCL301/302

(Continued)

		Item		Specifications
			24 VDC ± 5%, average:*2
			0.25 (1.29) A (at	25 mm/s printing speed, 25% printing ratio)
		For head	0.43 (1.72) A (at	50 mm/s printing speed, 25% printing ratio)
			1.66 (3.01) A (at 100 mm/s printing speed, 25% printing ratio)
Power supply			( ): Peak
		For motor	24VDC ± 5%, 1.0 A maximum
		For logic	5VDC ± 5%, 0.5 A maximum
Weight			Mechanism with cutter: approx. 440 g. Interface board: approx. 100 g
		Mechanism + cutter	107 (W) × 60 (D) × 71.0 (H) mm (excluding connector)
Dimensions		Interface board	140 (W) × 89 (D) × 24.0 (H) mm
			Pulse durability : 1 × 108 pulse/dot (using Fujitsu Takamisawa's standard
		Thermal head		driving method)
Life			Wear resistance : 50 km (at 25% printing ratio)
		Cutter	Cutting life: 3 × 105 times
		Operating temperature	+5 to +40°C*3
Environmental		Operating humidity	20 to 85% RH (no condensation)
conditions
		Storage temperature	–20 to +60°C (excluding paper)
		Storage humidity	5 to 95% RH (no condensation)
		Head temperature	By thermistor (applied energy control, abnormal temperature detection)
Detection		Paper out/Mark detect	By photointerrupter (command set)
		Head-up	By microswitch
Paper width			60–1+0mm
Recommended thermal sensitive			1 ply paper in roll	:	FTP-020P0020
			Thicker paper in roll :		FTP-020PJ102*4
paper*	5

*1: The data to be printed is automatically read out by the printer driver equipment memory (host system frame memory). The communication is parameter transfer.

*2: At 25°C, maximum applied voltage, minimum head resistance, specified paper, stable printing ratio.

*3: Temperature range for guaranteed printing density. It can operate at 0 to +40°C.

*4: Printer mechanism FTP-621MCL302 is to be used.

*5: Please contact us for other thermal papers.

3