Fujitsu FTP-621MCL302 manual FTP-621MCL301/302, Designation, General Specifications, Continued

FTP-621MCL301/302

■ DESIGNATION

	Item	Part number
Printer mechanism	Front paper insertion type	FTP-621MCL301
	Rear paper insertion type (supports thick paper)	FTP-621MCL302
Cutter		FTP-621CT001
Interface board		FTP-621DCL012
	Micro Controller Unit	FTP-621CU102
LSI
		FTP-633GA101
	Gate Array

■ GENERAL SPECIFICATIONS

	Item			Specifications
Printing method		Thermal-sensitive line dot method
Dot structure		448 dots/line
Dot pitch (Horizontal)		0.125 mm (8 dots/mm)—Dot density
Dot pitch (Vertical)		0.125 mm (8 dots/mm)—Line feed pitch
Effective printing area		56 mm
Number of columns		37 columns/line (maximum)—Alphanumeric KANA
Maximum printing speed		800 dotlines/s (100 mm/s) maximum
		JIS ANK	: 128	International characters : 130
Character types		Semi-graphic : 63		ASCII small characters : 31
		Download	: 384
Character composition, dimensions (H×W),		24 × 12 dots, (3.0 × 1.5 mm), 37 columns
		32 × 16 dots, (4.0 × 2.0 mm), 28 columns
Number of columns (standard)		24 × 24 dots, (3.0 × 3.0 mm), 18 columns
		32 × 32 dots, (4.0 × 4.0 mm), 14 columns
Interface		1) Centronics standard		2) Bus interface*1
	Cutting method	Guillotine method
Cutter	Cutting type	Full-cut or partial cut (command set)
	Minimum cut length	20 mm
	Paper thickness	65 to 150 μm

(Continued)

2