Fujitsu FTP-622DCL001/011 manual FTP-622DCL/DSL, Specification, Connector CN2, Pin assignment

FTP-622DCL/DSL

Product	Part Number	Function
Parallel Interface Board	FTP-622DCL001	Standard (without cutter)
	FTP-622DCL011	With cutter control
	FTP-622DSL001	Standard (without cutter)
Serial Interface Board	FTP-622DSL011	With cutter controller
	FTP-622DSL012	With cutter controller + FLASH ROM
	FTP-622DSL112	With Cutter + KANJI+FLASH ROM

■SPECIFICATION

			Item					Specification
	Data receive speed					19200, 9600, 4800, 1200 bps (set by dip switch)
	Synchronous method					Asynchronous, full duplex
	Hand shake					DTR/DSR signal or XON/XOFF
	Input output level					RS232C
	Signal level					Space (logic = 0)	+3 V ~ +12 V
						Mark (logic = 0)	–3 V ~ –12 V
2. SERIAL INTERFACE (RS232C)
	(1) Connector (CN2)
	Part number			:	B6B-XH-A (J.S.T)
	Mating connector part number :				XHP-6 (J.S.T) or equivalent
	(2) Pin assignment
	No.	Signal	I/O	Contents			No.	Signal	I/O	Contents
	1	FG	—	Frame GND			2	RD	I	Receive data
	3	TD	O	Transmission Data			4	DTR	O	Data terminal ready
	5	GND	—	Signal GND			6	DSR	I	Data set ready

Notes: “I” or “O” means a signal direction from the interface board side.

(3) Pin number

B6B-XH-A (J.S.T)

CN1

CN2

61

2