6-33
4. Press or .
The displayed option changes (SCSI, VIDEO,
TP_IF ).
5. When the desired interface appears, press
ENTER
to save the change.
The LCD returns to the <<SETUP MODE>>
menu screen (Interface).
6. To quit the <<SETUP MODE>>, turn off the
power.
Interface
VIDEO
<<SETUP MODE>>
Interface
TP_IF baud rate
This function sets the baud rate (signaling speed) according to the baud rate of the third party inter-
face (TP_IF). Set the speed slower than that of the host interface.
NOTE
You cannot use this function when the setup mode is brought by pressing
MENU
in the Ready
status.
Remarks
Unit: baud
LCD display
TP_IF Baud Rate
Options
2400, 4800, 9600, 19200 (Default: 9600)
1. In <<SETUP MODE>> initial screen, press
ENTER
.
The <<SETUP MODE>> menu screen
(Settings or Paper Length Check) appears.
NOTE
The “Settings” screen does not appear and
the “Paper Length Check” screen first ap-
pears when your scanner is not controlled
through the video or TP interface.
<<SETUP MODE>>
<<SETUP MODE>>
Settings
<<SETUP MODE>>
Paper Length Check
The following is an example of operation when you use this function.