Fujitsu M4099D SCSI ID

6-36

SCSI ID

This function sets the ID number for the SCSI interface.

NOTE

You cannot use this function when the setup mode is brought by pressing

in the Ready

status.

RemarksLCD display

SCSI ID

Options

0 to 7 (Default: 5)

The following is an example of operation when you use this function.

1. In <<SETUP MODE>> initial screen, press

ENTER

The <<SETUP MODE>> menu screen (Settings

or Paper Length Check) appears.

NOTE

The “Settings” screen does not appear and the

“Paper Length Check” screen first appears when

your scanner is not controlled through the video

or TP interface.

2. Press repeatedly until “SCSI ID” appears in

the lower line of the menu screen.

3. Press

ENTER

The option select screen appears with the current

setting 5 blinking (blinking indicates “change-

able”).

4. Press or .

The displayed option changes (6, 7, 0, 1, 2, 3, 4).

<<SETUP MODE>>

Settings

<<SETUP MODE>>

Paper Length Check

SCSI ID

<<SETUP MODE>>

SCSI ID

Contents

Main Note Treatment of This Manual EMC and Safety der/die/das Warning on Use Requiring Extreamely High Safety Levels Warning on Reproduction About Copyright Conventions for Alert Messages Trademark Acknowledgment PFU Offices iv Please send your comments on this manual or on PFU products to the following addresses: v Preface CONTENTS Page COMPONENTS Checking the Components Units and Assemblies Units Page Assemblies Arrangement Operator Panel 1-6 Button/LED Function POWER DATA CHECK LCD Display Operation status display Error status display Buzzer Page Precautions Page Page Page Page Page Page Basic Operation of the Operator Panel Displaying detailed information if an error occurred Lifting or lowering the hopper Clearing a consumable life alarm Confirming the number of sheets processed by the scanner Using the function buttons (F1, F2, and F3) Using the setup, browse, and test modes 3-8 * Turn off to quit <<MODE SELECT>>. : Cursor buttons : Blinking 3-9 Transition of operator panel status and display The following outlines the transition of status and display of the operator panel. Turn power off to quit. Error occurred Page A Feeding Direction B Document Size Document Quality Paper types of documents Ream weight of paper Precautions Page Page Installation Specifications Page Consumables Page SETUP, BROWSE, AND TEST MODES Setup, Browse, and Test Modes Functions not available in setup mode Functions not available in browse mode Activating the Setup or Browse Mode SETUP BROWSE XXXXX Button functions in setup or browse mode Mode selection ( 6-3 MENU pressed in Ready status) ENTER Contents of the Setup or Browse Mode 6-5 6-6 Setup mode menu screen : Cursor buttons : Blinking * To save the change, press ENTER. To quit without saving change, press CANCEL. Transition of screens in setup mode Settings Page Paper length check ON 10 mm Paper thickness check Paper thickness setup Page Skew check IPC-3 mode Paper types and corresponding pattern numbers 6-16 Hopper height This function sets the initial height of the hopper. Set the height which you frequently use. Reading parameter validity Page Paper separation level Page Drop-out color Page Consumable counter Consumable counter reset Page Consumable alarm mode Consumable Alarm Mode Buzzer Page Buzzer volume LCD contrast Picking speed Page Interface TP_IF baud rate RS232C baud rate Page SCSI ID Product ID Pre-pick Page Pick start time Manual feed timeout Manual Feed Timeout 10 S Manual Feed Timeout Paper pick retry Page Paper feed retry Page Function key Page Setup mode lock ON OFF Black background Page Language White follower mode White follower mode Page Activating the Test Mode <<TEST MODE>> T Please wait SETUP BROWSE TEST SETUP BROWSE TEST <<TEST MODE>> Offline Feed Test Mode selection (power on with MENU pressed) 6-55 * Turn off to quit <<MODE SELECT>>. : Cursor buttons : Blinking Contents of the Test Mode Offline feed test Page Options Device life GLOSSARY OF TERMS Page Page Page Page Page Page INDEX A C B D O P I L M H G S R T W U V