fmstat(8)

NAME fmstat - report fault management module statistics

SYNOPSIS fmstat

fmstat [-a] [ [-s] [-z] [-mmodule]] [ interval [ count]]

fmstat -h

DESCRIPTION The fmstat utility can be used by administrators and service personnel to report statistics associated with the Fault Manager (fault manager daemon), and its associated set of modules. The Fault Manager runs in the background on each OPL system. It receives telemetry information relating to problems detected by the system software, diagnoses these problems, and initiates proactive self-healing activities such as disabling faulty components.

You can use fmstat to view statistics for diagnosis engines and agents that are currently participating in fault management. The fmadm(8), and fmdump(8) man pages describe more about tools to observe fault management activities.

If the -moption is present, fmstat reports any statistics kept by the specified fault management module. The module list can be obtained using fmadm config .

If the -moption is not present, fmstat reports the following statistics for each of its client modules:

module

The name of the fault management module as reported by

 

fmadm config.

 

 

ev_recv

The number of telemetry events received by the module.

 

 

ev_acpt

The number of events accepted by the module as relevant to a

 

diagnosis.

 

 

wait

The average number of telemetry events waiting to be

 

examined by the module.

 

 

svc_t

The average service time for telemetry events received by the

 

module, in milliseconds.

 

 

%w

The percentage of time that there were telemetry events

 

waiting to be examined by the module.

 

 

%b

The percentage of time that the module was busy processing

 

telemetry events.

 

 

open

The number of active cases (open problem investigations)

 

owned by the module.

 

 

System Administration

61