RGB INPUT MODE

1

Press to select the input mode.

The input terminal of RGB mode is as follows.

• RGB1: mD-sub

* For selection of the input terminal, see

“SETTING THE INPUT TERMINALS” on RGB1 mode P. E-25.

Italiano Français Español Deutsch English

CONVENIENT FUNCTIONS

DISPLAY

Displaying on-screen information.

Press 3.

The channel or mode is indicated on the screen for 5 seconds.

PICTURE MODE

Press 4.

This button can be used to switch the picture mode.

In the picture mode, you can switch between the set status and the fine mode. * For the picture mode settings, see “Picture Mode (P. E-20)”.

PICTURE MEMORY

Press 5.

This button can be used to recall the settings of the picture memories 1 – 8. Each time this button is pressed, the setting changes as follows.

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

* For the picture memory settings, see “Picture Memory (P. E-21)”.

DUAL CHANNEL

Press G.

This function enables selection of the audio mode when there is a dual-channel broadcast. Each time this button is pressed, the mode is switched as shown in the figure below.

￿￿￿￿￿￿￿￿￿￿￿￿￿ ￿￿￿￿￿￿￿￿￿￿

Depending on the broadcast, this function may not be available.

OFF-TIMER

Press 7.

This can be used to set the time before the power is turned off (Stand-by state). Each time this button is pressed, the setting changes as follows.

￿￿￿ ￿￿ ￿￿￿￿￿￿ ￿￿￿￿￿￿ ￿￿￿￿￿￿￿ ￿￿￿￿

Note

• Functions may not be available with some models and some device options.

Póññêèé Português

中文

日 本 語

E-15