INFORMATION
•Receptacle
Make sure that the power cord’s grounding wire is grounded.
The plasma display comes with a
•Have the plasma display inspected and cleaned by your dealer at regular intervals.
•Do not display the same picture for a long time, because part of the screen may
•When the screen size is set to “Normal” and a picture was displayed for a long time, a residual image may be created at the boundary with the part at which an image is not displayed. We recommend that you use a screen size other than “Normal”. (See P.
•
•Some models are fitted with a radiator fan to prevent the plasma display’s internal temperature from rising during operation. Be careful of the air emitted by the radiator fan, as it may be hot.
•Contact your dealer when causing a bad influence to the plasma display and other
You may need to move your plasma display if it produces degraded pictures or noise due to electromagnetic radiation, or if the infrared remote control does not function properly.
•Pictures may not be displayed properly if you connect a
•The protective circuit, built into the display, automatically turns off the power if the display has a problem. In this case, you will see that the power indicator lamp flashes red or green.
WarningIf the power indicator lamp flashes red or green, this signifies that the display has developed a problem. When this happens, be sure to unplug from the receptacle to prevent fire or electric shock. Then contact your dealer.
•It is important to install the plasma display in a location close to a receptacle, and where the emergency stop button can be easily reached.
Note•Cables for connecting the display to external equipment are not supplied. Contact your dealer for more information on these supporting products.
•The pictures and diagrams in this manual are meant to complement the explanations and may differ slightly from the actual items.
中文
日 本 語