PART NAMES AND FUNCTIONS (Continued)

Bottom

1

2

3 4

5 67

8

1Main power switch

Press this switch when the power is OFF to turn it ON. When you do so, the power indicator lamp will become red, indicating that you can turn ON or OFF the power to the display using either the remote control or the display’s control panel.

Press this switch when the power is ON to turn it OFF.

2RS-232C terminal (RS-232C)

This terminal is provided for you to control the display from the PC. Connect it to the RS-232C terminal on the PC. When connecting a cable, attach a ferrite core to the cable. (See P. 14.)

*No RS-232C cable is supplied with the display. The type of cable to be used varies depending on the PC model. Contact your dealer for more information.

3RGB input terminal (RGB INPUT/mD-sub)

Connect this terminal to the PC’s display (analog RGB) output terminal.

*No RGB cable is supplied with the display. The type of cable to be used varies depending on the PC model. Contact your dealer for more information.

4RGB synchronization switch (SYNC SW TTL/ANALOG (75 Ω))

This switch is used to terminate pins 13 and 14 of the RGB terminal with 75 Ω respectively for receiving horizontal (H) and vertical

(V) synchronization signals.

TTL:

Used when sending RGB signals from the PC to the RGB terminal

ANALOG (75 Ω): Used when sending analog synchronization signals to the RGB terminal

5Component video input terminal (COMPONENT VIDEO INPUT)

Connect this terminal to the component video output (color difference output) terminal of your HDTV unit or DVD player.

When connecting a cable, attach a ferrite core to the cable. (See P. 14.)

6S-video input terminal (S-VIDEO INPUT)

Connect this terminal to the S-video output terminal of your VCR or video disk player.

7Video input terminal (VIDEO INPUT)

Connect this terminal to the video output terminal of your VCR or video disk player.

8Power input terminal

Connect this terminal to the power cable supplied with the display.

10