SAFETY MEASURES
To prevent accident and ensure safety in the event of an earthquake, fix the display securely into position as described below.
FIXING THE DISPLAY TO A WALL OR PILLAR
You need two strong cords.
1Attach a bracket to each hole at the rear of the display
Safety braket A
Screw A
To do this, use screw A (10 mm long) to attach safety bracket A, supplied with the display, to the hole at the rear of the display.
2Attach two brackets to the wall
To do this, use screws B (20 mm long) to attach safety brackets B, supplied with the display, to the wall.
*To make sure that the display is stable, attach wall brackets at the same height as (or slightly lower than) the display brackets.
3Tie brackets A and B together
To do this, use strong cords to fix the display securely to the wall.
Strong cords (not supplied)
Screw A (10 mm)
Screw B (20 mm)
Safety |
|
braket A | Safety |
| braket B |
FIXING THE DISPLAY TO THE STAND
Use two screws, supplied with the stand, to fix the display using the holes provided at the rear of the stand.
See the instruction manual for the stand
Screw
(supplied with stand)
8