OTHER ADJUSTMENTS (FEATURES MENU)(Continued)

Using screen protection functions (examples)

The screen protection functions minimize phosphor burn-in but cannot completely eliminate it.

When using the display occasionally

When using the display continuously

 

 

• Select a desired amount of time for “DPMS”.

When switching between RGB and video input modes only

Thus, when the display does not receive a signal, it will automatically

occasionally

display white or black over the entire screen. When the predetermined

(1)

Select “Time” for “Mode/Time” with “Screen Orbiter”.

time elapses, the power will turn OFF.

(2)

Select a desired range for “Moving Area” with “Screen Orbiter”.

 

 

This causes the screen saver pattern to move in the same range at

 

 

regular intervals.

 

When switching between RGB and video input modes

 

frequently

 

(1)

Select “Mode” for “Mode/Time” with “Screen Orbiter”.

 

(2)

Select a desired range for “Moving Area” with “Screen Orbiter”.

 

 

When the mode is switched from Video to RGB, the display position

 

 

moves.

 

 

 

• Input mode of priority (Input Priority)

All modes

You can use this option to switch between modes only when a signal is received through the selected input mode terminal. You cannot switch the input mode.

Each time you press or , one of the available choices appears in the following sequence:

Off:Switches between modes normally.

Other modes: Displays pictures when a signal is received through the selected input mode terminal.

Press to store.

*RGB1 mode cannot be selected.

• Assigning Numbers to Displays (Monitor No.)

All modes

When you use two or more displays, you can use a single remote control to control individual displays by assigning a unique number to each of the displays.

Each time you press or , one of the available numbers appears in the following sequence:

0:You can normally control displays.

You cannot control displays if you press any of [SHIFT 1] through [SHIFT 4].

1–4: Allows you to control a desired display by pressing the corresponding button (one of [SHIFT 1] through [SHIFT 4]).

When you do not press any of the SHIFT buttons, you can control all displays.

Press to store.

* You can check the “Monitor No.” on the Information screen. (See P.38.)

36