PART NAMES AND FUNCTIONS
Front
Control Panel (bottom)
1Power indicator lamp
This lamp shows the state of the power supply.
Lit (red): |
Lit (green): Power ON
Lit (orange): Power saving (DPMS: Power saving function) mode ON
Flashing (red): Malfunction (Flashes differently depending on the type of malfunction. See P. 44 for more information.)
2Remote control signal receiver
Receives signals from the remote control.
3Main power switch
When pressed, power indicator lamp 1 lights red, and the power can be turned on or off by the remote controller.
When this switch is pressed again, the power is cut and power
indicator lamp 1 goes off.
4Power button [POWER]
Turns the power ON or OFF.
5Input mode selector button [MODE]
Switches between picture input modes.
6Wide screen selector button [WIDE]
Switches the screen over to a desired wide screen.
7Menu button [MENU]
Displays picture adjustment menus.
8Adjustment buttons [
/ 
]
Adjust the volume.
The [
/ 
] buttons can also be used to scroll through the options when a menu is displayed.
9 Adjustment buttons [
/ 
]
The [
/ 
] buttons can also be used to scroll through options in a menu, or to change values.
0 Enter button [ENTER]
Press this button to finalize the selection of a desired option in a menu.
Warning
If the power indicator lamp flashes red, this signifies that the display has developed a problem. When this happens, be sure to remove the power plug from the receptacle and contact your dealer. Leaving the display power ON can result in fire or electric shock.
7