•Adjusting Contrast (Contrast)

Any value between -30 and +30 can be selected.

: Higher contrast

: Lower contrast

Press to store.

• Adjusting Screen Brightness (Brightness)

Any value between -60 and +60 can be selected.

: Brighter screen

: Darker screen

Press to store.

• Adjusting Color Darkness (Color)

Any value between -60 and +60 can be selected.

: Darker colors

: Lighter colors

Press to store.

• Adjusting Tint (Tint)

Any value between -30 and +30 for [ ], and -60 and +60 for [ ] can be selected.

: More greenish colors

: More purplish colors

Press to store.

• Adjusting picture Sharpness (Sharpness)

Any value between -16 and +16 for [ ], and -4 and +4 for [ ], can be selected.

: Sharper pictures

: Less sharp pictures

Press to store.

• Making gamma correction(Gamma)

You can use this option to make a dynamic gamma correction suitable for still or motion pictures.

Each time you press or , one of the available choices appears in the following sequence:

Dinamic1, 2, 3:Suitable for watching a motion picture.(Use either of better picture quality.)

Static:

Suitable for watching a still picture.

Press

to store.

* Can select Static only in RGB mode.

•Adjusting Color Temperature (Color Temp.)

Use or to specify a desired color temperature. Each time you press or , one of the available choices appears in the following sequence:

Warm: More reddish colors

Standard:Standard color temperature

Cool:

More bluish colors

User:

User Color Temp. setup

• Setting User Color Temp. (User Color Temp.)

Can set up when User is selected in Color Temp.

Press or to select Red, Green or Blue and press or to make adjustment in the range of 0 to 255.

* Color Temp. setup is switched to User. The initial value of User Color Temp. is adjusted individually at the factory.

Setting Noise Reduction (Noise Reduction)

Can select the noise reduction setting corresponding to the noise level of the input signal.

 

User ColorTemp.adjustment screen

Each time you press or ,one of the available choices appears in the following sequence:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Off: Noise reduction does not function.

Min.: Weak setting

Std.: Standard setting

Max.: Strong setting

*Some type of signal can not be selected.

English

E-25