PART NAMES AND FUNCTIONS
Front
Control Panel (bottom)
1Power indicator lamp
This lamp shows the state of the power supply.
Lit (red): |
Lit (green): Power ON
Lit (orange): Power saving (DPMS: Power saving function) mode ON
Flashing (red): Malfunction (Flashes differently depending on the type of malfunction. See P.
2Remote control signal receiver
Receives signals from the remote control.
3Main power switch
When pressed, power indicator lamp 1 lights red, and the power can be turned on or off by the remote controller.
When this switch is pressed again, the power is cut and power
indicator lamp 1 goes off.
4Power button [POWER]
Turns the power ON or OFF.
5Input mode selector button [MODE]
Switches between picture input modes.
6Wide screen selector button [WIDE]
Switches the screen over to a desired wide screen.
7Menu button [MENU]
Displays picture adjustment menus.
8Adjustment buttons [
/ 
]
Adjust the volume.
The [
/ 
] buttons can also be used to scroll through the options when a menu is displayed.
9Adjustment buttons [
/ 
]
The [
/ 
] buttons can also be used to scroll through options in a menu, or to change values.
0Enter button [ENTER]
English
Press this button to finalize the selection of a desired option in a menu.
Warning
If the power indicator lamp flashes red, this signifies that the display has developed a problem. When this happens, be sure to remove the power plug from the receptacle and contact your dealer. Leaving the display power ON can result in fire or electric shock.