•FEATURES setup screen has the following 5 options.

Adjustment

: Can make a fine adjustment of pictures such as Dot Clock, Clamp Position.

Function

: Can make a function setting such as 24 Frame Mode, 3D Y/C. (See P. E-30.)

On Screen Menu : Can make a display setting such as OSD, Language. (See P. E-30.)

Input Terminal

: Can make an input terminal setting such as Video Input. (See P. E-31–E-32.)

Others

: Can make other settings. (See P. E-32–E-35.)

ADJUSTMENT

• Adjusting Dot Clock (Dot Clock)

You may find that pictures blur, depending on the clock frequency of your PC’s processor.

If you experience blurring, you can obtain a clearer picture by adjusting the “Dot Clock”.

Use or to select a value between -60 and +60.

Press to store.

• Adjusting Clock Phase (Clock Phase)

 

 

 

 

 

 

 

 

 

 

 

 

You may find that pictures blur, depending on the clock phase of your PC’s processor. If you

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

experience blurring, you can obtain a clearer picture by adjusting the “Clock Phase”.

 

 

 

 

Use

or

to select "Auto" or "Manual".

 

 

 

 

Auto:

Makes automatic adjustment.

 

 

 

 

Manual: Does not make automatic adjustment.

 

 

 

 

 

 

Use or

to specify a value between 1 and 32.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Press

 

to store.

When selecting Manual by Clock Phase

English

•Eliminating Flicker (Vertical Sync)

Corrects the vertical synchronization signal timing to eliminate vertical flicker.

Use or

to specify a value between -1 and +1.

Press

to store.

*Some type of signal can not be selected.

• Adjusting Clamp Position (Clamp Position)

Adjusts clamp pulse in accordance with the input signal received from connected equipment. Use or to specify a value between -8 and +8.

Press to store.

•Selecting the Optimum Dynamic Range of Images (Auto Calibration)

Receives a white screen signal and adjusts the dynamic range of images to the optimum.

(1)Select Auto Calibration and press . Auto Calibration screen appears.

(2)Select Execute and press .

Press or to select Yes or No. Yes: Stores the data of Auto Calibration.

No: Disables the execution result of Auto Calibration.

(3)Press to execute.

"Auto Calibration" setting screen

"Yes/No" selection screen

*On-screen information disappears if you do not take any action for about 60 seconds.

*The following abbreviations used in this document represent input modes in which you can make adjustments:

: Video mode, : S-video mode, : Comp.video mode, : RGB mode

E-29