• Setting Exhibition Mode (Exhibition Mode) | All modes |
You can use this option to display the enhanced contrast, which is most suitable for the use by unspecified persons.
Each time you press 
or 
, one of the available choices appears in the following sequence:
On 
Off
On: Sets up Exhibition mode.
Off: Sets up normal mode.
Press 
to store.
*In Exhibition mode, the display returns to the original setting in about 5 minutes even if the adjustment is changed.
*The setup will be cancelled when removing the power plug from the receptacle.
• Horizontal/Vertical installation (Installation) | All modes |
You can use this option to setup the number of fan rotation and rotate the text, etc. for horizontal and vertical installation.
Each time you press 
or 
, one of the available choices appears in the following sequence:
Normal : Displays text normally.
+90 Deg. :Displays text from left to right when the display is installed with the power indicator lamp at the bottom.
Press 
to store.
* Be sure to make this setup when changing the direction of installation.
English
• Locking Main Unit Button (Key Lock) | All modes |
You can use this option to disable the main unit button.
Each time you press 
or 
, one of the available choices appears in the following sequence:
On 
Off
On: Disables the main unit button.
Off: Enables the main unit button.
Press 
to store.
• Displaying System Status (Information)
Displays system operation status.
Select “Information” and press 
.
The “Information” screen will appear.
Mode: | Input mode appears at the upper right corner of the screen. |
Monitor No.: | Monitor number |
Freq. Scan Mode: Frequency scanning | |
Input Signal: | Video mode |
Input Sync.: | Signal type |
Freq.: | Frequency and polarity (fH, fV) |
Preset No.: | RGB code number |
Information screen (Video Input Mode)
Information screen (RGB2 Input Mode)
*
*The following abbreviations used in this document represent input modes in which you can make adjustments:
: Video mode, 
: 
: Comp.video mode, 
: RGB mode