Fujitsu USING THE FACTORY DEFAULT MENU

Option	Function
(4) Screen Orbiter	Sets up screen orbiter.
(for RGB)

(5)	Input Priority	Specifies input mode of
		highest priority.
(6)	Monitor No.	Selects display number.
(7)	Direct Setting	Selects input signal.
(for RGB)

(8) Code Setting		Specifies and displays type
(for RGB2, RGB3)		of input signal directly.
(9) White Screen		Sets up to display white
		over the entire screen.
(10)	Exhibition Mode	Sets up Exhibition mode.
(11)	Installation	Sets up whether horizontal
		or vertical installation.
(12)	Key Lock	Locks the main unit button.
(13)	Information	Displays system operation
		status.

Operation

Display the “Screen Orbiter”

adjustment screen and use or to select an option.

Use or to switch between available choices for the selected option.

Use or for switching.

Use or for switching.

Use or for switching.

Display Code Setting screen

and press or to select an option.

Select Manual to set up Parameter.

Use or for switching.

Use or for switching.

Use or for switching.

Use or for switching.

Display the “Information” screen.

Range/Setting

Mode/Time Off (disabled) Time (every 1 hr)

Mode (every time mode is switched)

Moving area

Min.(moves in small range) Std.(moves in moderate

range)

Max. (moves in wide range)

Off/RGB2/RGB3/Video/ S-video/Comp.video

0 (no setup)/ 1/2/3/4

RGB1:

Auto/VGA/WVGA/XGA/

WXGA RGB2, RGB3:

Auto/VGA/WVGA/480P/

XGA/WXGA/SXGA/ SXGA+

Auto/Manual

On /Off(disabled)

On (Exhibition mode)/ Off(disabled)

-90 Deg. (counterclockwise)/

Normal/

+90 Deg. (clockwise)

On (Key Lock)/

Off(disabled)

Display only

English

USING THE FACTORY DEFAULT MENU

•Select FACTORY DEFAULT and execute to restore the adjustment/setting made in the MENU to factory settings. (See P. E-41.)

FACTORY DEFAULT Menu screen		Yes/No selection screen
	Option	Function	Operation	Range/Setting
	FACTORY DEFAULT	Restores the adjustment/	Select Execute and use or	Yes/No
		setting made in the MENU	to select an option.
		to factory settings.

E-25