INSTALLATION

To prevent the display’s internal components from overheating, make sure that the display is installed in a well-ventilated location.

Be sure to use the optional desktop stand, ceiling-mounting unit, wall-mounting unit and other unit when installing this display. Also, be sure that your dealer performs the installation.

See the appropriate instruction manual for more information on the installation hardware you select.

To ensure proper heat radiation, provide at least as much space around the display as shown below.

*Make sure that the display is installed in a location where the temperature can be maintained between 0° C and 40° C.

*Never attempt to tilt the display sideways or backward.

*To prevent the power and other cables from being accidentally pulled, be sure to make the wiring work along the wall or through the corners of floor.

*The display can be installed with either of its sides facing down.

*To prevent an accident and ensure safety in the event of an earthquake, fix the display securely into position as described below.

When using the stand

Front

 

Side

 

Upper

(cm)

4

(cm)

 

 

 

10

 

 

 

10

10

 

Wall

Left

Right

 

 

 

 

6

 

 

Floor

Stand

Floor

Stand

 

 

When using other unit than desktop stand (horizontal type)

Front

 

Side

 

(cm)

(cm)

Upper

 

 

10

 

 

10

10

 

Left

Right

Wall

 

 

6

Lower

4

When using other unit than desktop stand (vertical type)

FrontSide

Upper

(cm)

(cm)

10

10

10

 

Left

Right

Wall

 

 

10

 

Lower

4

CAUTION: When installing the display vertically, setup vertical installation. (Refer to Installation. See P.E-40) Consult your dealer when installing the display vertically.

Note

The display is a highly precise piece of equipment and therefore must be packed properly before transportation. Be sure to use only those packing materials originally supplied with the display when repacking it.

Reference

See P.E-42 for more information on options.

E-6