Fujitsu manual System Configurator and Order-Information Guide, PRIMERGY RXI300, Status, 5 of

Start PRIMERGY RXI300

System Configurator and Order-Information Guide

PRIMERGY RXI300 Status 2008-01-29

Section I

Basic unit

	PRIMERGY RXI300					Basic Unit including:
						2U Chassis with
	Rack unit 2U					- 3 bays for 350W hot-plug power supply moduls,
						2 hot plug moduls installed, 3rd modul req. for redundancy
	Basic unit with:					(PSU redundancy restricted to 240V operation),
	- 1x Itanium 2 processor (max 2)					2 sep. AC inlets
						- 2xSCSI HD drive bays with hot swap backplane
	4 GB main memory					- Fan unit with 6x60mm hot swap, variable speed fans
	1.6GHz / 3MB TLC		(Madison)	S26361-K963-V210		- I/O Riser board with 3 PCI-X slots
	9015 (1.4GHz/12MB TLC)		(Montecito)	S26361-K963-V944		2xPCI-X long with 100MHz
						1xPCI-X long with 133MHz
						- 1x IDE CDROM/DVD-ROM Combodrive
						- Front panel board and front bezel
						* Rack- mounting kit (sliding rail´s)
						- telescopic rails kit
						- cable management arm
						* Systemboard with
						- 2 Itanium CPU sockets
		S26113-F602-E350				one CPU installed according to the configurator
		3rd power supply module (PSU)				thermal blank in other socket if 2nd CPU not installed
		for 2+1 redundancy (350W)				- 2 memory banks with 4 DIMM memory slots each
		max. 1x per system				for up to 16GB PC2100 registered DDR RAM with ECC
						one bank installed according to the configurator
						- onboard dual channel Ultra 320 SCSI
						first ch.for int. Drives (SCSI backplane), RAID 1 support
						second ch. for ext. SCSI devices
						- dual port LAN-Controller 10/100/1000TX
						- VGA Controller (8MB RAM) on-board (ATI Rage XL)
						- External Interfaces:
	PRIMERGY PRIMECENTER- Rack					1x RS-232 (serial, RJ45 connector) in back
						2x VGA ports, 1 in front, 1 in back
					"Rack-mounting ex factory"	4x USB 1.1, 2 in front, 2 in back
SNP:SY-F1647E301-P					This service is to be ordered once	2x LAN 10/100/1000 (RJ45) in back
Installation ex works for one					per installable server/storage	1xVHDCI SCSI connector
server or subsystem.					subsystem, in order to get the	no PS/2 connection for KB / Mouse
Hereby the rack will be delivered					server/storage subsystem	(USB connectivity must be used instead)
completely pre-mounted and					mounted into the PRIMERGY racks.	IA64 Server Support CD, User Manual
all wired connections are tested.					In case of the 46 U PRIMERGY rack,
With racks 12U, 24U, 38U:					this service has to be ordered,
Systems and components					to get the mounting kits and the	ServerView:
will be delivered installed in the rack					cables installed	FSC IA64 Server Support CD
With racks 46U:						for EFI service partition
Systems and components
will be delivered separately
To be ordered only together with
a PRIMERGY-					Mounting kit for PRIMERGY RXI300 is part of the basic unit
PRIMECENTER rack					- 1 pair of telescopic rails (647 - 810mm)
e.g.:					- 1 bracket DC-PC-Rack
S26361-K826-V10x					- 1 cable management for DC-PC-racks
refer configurator PC-Rack					Mounting kit for mounting of servers in in FSC 19" DataCenter- and
max. 1x per System					PRIMECENTER- racks and all server racks conforming to EIA standard
					EIA-310-D for 19" racks.
					Therefore the mounting kit is variable in depth from 647 - 810mm

-Connetion for KVM switch / Rack console

-RC22 can be directly connected (both USB and PS/2 connections)

-KVM S2 series needs the KVM S2 adapter USB-VGA

-For PS/2 KVM "S1" series as well as for standard PS/2 KB / Mouse an additional USB to PS/2 adapter must be bought additionally and connected to the RXI600. The adapter offers 2 x PS/2 ports.

Adaper order number, to purchase via PRIMEPOWER, is D:GP70P-KA01 Adapter for PS/2<->USB

-Appropriate FSC USB keyboard is S26381-K340-V1*

This keyboard also needs USB cable T26139-Y3812-V1

A

Fujitsu Siemens Computers	5 of 10
Enterprise Products PRIMERGY Server