The cables of the connection from the subsystems (SX30) to the Raid Controllers, see configurator SX30

B

System Configurator and Order-Information Guide

PRIMERGY RXI300

Status 2008-01-29

Section V

SCSI / Fibre Channel Controller

included in the basic unit

onboard 2 ch.SCSI Controller U320

connectivity

1)for int. Drives, RAID 1

2)ext. VHDCI

The system is equipped with a onboard dual channel Ultra 320 SCSI controller. one channel can be connected to internal devices via the SCSI blackplane. The two int. HDD's can be mirrored if they are connected to the

on-board controller with hot swap support.

The other SCSI channel can be used by external SCSI devices.

Fibre Channel controller for subsystems and SAN

S26361-F3141-E10

2GBit/s FC Controller

Emulex

LP1050, full height bracket

1 channel 2GBit/sec FC controller LC Interface for 50um Fiber

PCI-X 64Bit / 133MHz, 170mm 3.3V / 5V tolerant signaling

max. 2x per system

Section VI

Disk Array

Additional RAID Controllers for connection of external Disk Arrays in Subsystem SX31

S26361-F3006-E128

2-channel RAID Controller U320

LSI 320-2

128MB SDRAM ECC Cache RAID 0, 1, 10, 5 & 50 default with TBBU

plug: internal 1x HD68;

external: 1x VHDCI

without cable

incl. SW and description (Ger/US)

64/66 PCI controller, 180mm 3.3V and 5V tolerant signaling

max. 2x per system

All Controllers for the connection of external storage systems are delivered without cables. For the configuration of external cabling see the configurator for external storage systems.

C

Fujitsu Siemens Computers

7 of 10

Enterprise Products PRIMERGY Server

Page 7
Image 7
Fujitsu RXI300 manual Section Scsi / Fibre Channel Controller, Included in the basic unit, Section Disk Array