Ports and operating elements
Installing a module
►Place the module into the module bay so that the contacts enter first.
►Push the module into the module bay until you feel it locking into place.
SIM card
Follow the instructions supplied by the provider of the SIM card.
Inserting the SIM card
►Switch the notebook off and pull the power plug out of the mains socket.
►Close the LCD screen so that it locks into place.
►Disconnect all cables connected to the notebook.
►Turn your notebook over and place it on a stable, flat and clean surface. If necessary, lay an
►Remove the battery (see Section "Removing the battery", Page 16).
a
2
►Slide the SIM card into the slot (1) (with the contacts facing upwards) until it engages.
►Slide the clip (a) of the SIM card in the direction of the arrow (2).
1
►Reinstall the battery (see "Installing battery", Page 17).
►Turn the notebook the right way up and place it on a flat surface.
►Reconnect the cables that you disconnected previously.
21 |
