Fujitsu S6110 manual C A U T I O N, Menu Field, Options, Default, Description

M a i n M e n u

Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu

Menu Field	Options		Default	Description
Multi-Sector	■	Disabled	[16 Sectors]	This option cannot be changed when Auto is selected. Specify the num-
Transfers:	■	2 Sectors		ber of sectors per block for multiple sector transfer.
	■	4 Sectors
	■	8 Sectors
	■	16 Sectors
	■	32 Sectors
	■	64 Sectors
	■	128 Sectors
LBA Mode	■	Disabled	[Enabled]	Enables or disables logical Block Addressing in place of Cylinder, Head,
Control:	■	Enabled		Sector addressing. This option cannot be changed when Auto is selected.
PIO Transfer	■	Standard	[Fast PI0 4]	Selects the method for moving data to/from the drive. Autotype the
Mode:	■	Fast PIO 1		drive to select the optimum transfer mode. This option cannot be
	■	Fast PIO 2		changed when Auto is selected. Multi-word DMA is automatically set to
	■	Fast PIO 3		mode 1 for Fast PIO 1, Fast PIO 2, Fast PIO 3, and set to mode 2 for Fast
	■	Fast PIO 4		PIO 4 / DMA.
DMA Transfer	■	Disabled	[Ultra DMA 5]	Selects the method for moving data to/from the drive. Autotype the
Mode:	■	Multiword DMA 1		drive to select the optimum transfer mode. This option cannot be
	■	Multiword DMA 2		changed when Auto is selected.
	■	Ultra DMA 0
	■	Ultra DMA 1
	■	Ultra DMA 2
	■	Ultra DMA 3
	■	Ultra DMA 4
	■	Ultra DMA 5

C A U T I O N

■A bootable CD-ROM may have either a floppy disk or hard drive format. When the bootable CD-ROM is used, the drive allocations change automatically with- out changing the BIOS setup. If a floppy disk format CD-ROM is used, the CD-ROM becomes Drive A. The CD-ROM will only take drive C: (hard drive for- mat) if the internal hard drive is not present or is dis- abled. The bootable CD-ROM can never use a C: designation if a formatted internal hard drive is present since the C: designator is always reserved for the internal hard drive.The boot sequence ignores the new drive designations, however, your application software will use the new designations.

■Be careful of the operating environment when boot- ing from a CD-ROM or you may overwrite files by mistake.

7