Fujitsu S6120D manual Secondary Master Submenu of the Main Menu, Type Auto, Control Enabled

L i f e B o o k S S e r i e s N o t e b o o k B I O S

Secondary Master Submenu of the Main Menu

The Secondary Master submenu is for the internal CD- ROM drive. The drive type is displayed on this menu as well as the Main menu. Your notebook auto-senses the characteristics of the internal drive installed. You will

not need to modify these settings; they are displayed for your reference.

Note that actual drive labels shown may vary.

PhoenixBIOS Setup Utility

Main

Secondary Master [CD-224E-(SM)]		Item Specific Help
Type:	[Auto]	Select ATA/ATAPI drive
		installed here.
Multi-Sector Transfers:	[Disabled]
LBA Mode Control:	[Disabled]	[Auto]
Transfer Mode:	[Standard]	The BIOS auto-types the
Ultra DMA Mode:	[Disabled]	drive on boot time.
		Except [Auto]
		You enter parameters of
		the drive.
		[None]
		The drive is disabled.

F1	Help	Select	Item
ESC	Exit	Select	Menu

-/Space	Change	Values
Enter	Select	▲ Sub-Menu

F9 Setup Defaults

F10 Save and Exit

Figure 3. Secondary Master Submenu

Table 3: Fields, Options and Defaults for the Secondary Master Submenu of the Main Menu

Menu Field	Options		Default	Description
Type:	■	Auto	[Auto]	Selects the ATA/ATAPI device type. Select Auto to have the type auto-
	■	None		matically identified by the BIOS at POST. If None is selected, all of the
	■	CD-ROM		following Set-up items do not appear. Select CD-ROM or Hard Disk for
	■	Hard Disk		appropriate drive type installed at this connection.
Multi-Sector	■	Disabled	[Disabled]	This option cannot be changed when Auto is selected. Specify the num-
Transfers:	■	2 Sectors		ber of sectors per block for multiple sector transfer.
	■	4 Sectors
	■	8 Sectors
	■	16 Sectors
LBA Mode	■	Disabled	[Disabled]	Enables or disables Logical Block Addressing in place of Cylinder, Head,
Control:	■	Enabled		Sector addressing. This option cannot be changed when Auto is selected.

8