Fujitsu S7110 Drive1 Submenu of the Main Menu, Type Auto, Multi-Sector Disabled, Control Enabled

				M a i n M e n u
Drive1 Submenu of the Main Menu
The Drive1 submenu allows you to configure secondary			Note that actual hard drive label shown may vary.
ATA devices.			Depending on the drive type, information such as cylin-
			ders, heads and sectors may also be displayed.
		PhoenixBIOS Setup Utility
	Main
	Drive1 [MATSHITADVD-RAM UJ-841S]			Item Specific Help
	Type:	[Auto]		Select ATA/ATAPI drive
	Multi-Sector Transfers:	[Disabled]		installed here.
	LBA Mode Control:	[Disabled]		[Auto]
	Transfer Mode:	[Standard]		The BIOS auto-types the
	Ultra DMA Mode:	[Disabled]		drive on boot time.
				[None]
				The drive is disabled.

F1	Help	Select	Item
ESC	Exit	Select	Menu

-/Space	Change	Values
Enter	Select	▲ Sub-Menu

F9 Setup Defaults

F10 Save and Exit

Figure 3. Drive1 Submenu

Table 3: Fields, Options and Defaults for the Drive1 Submenu of the Main Menu

Menu Field	Options		Default	Description
Type:	■	Auto	[Auto]	Selects the ATA/ATAPI device type. Select Auto to have the device (CD-
	■	None		ROM, CD-R/RW, DVD-ROM, etc.) automatically identified by the BIOS
				at POST. If None is selected, the following Set-up items do not appear.
Multi-Sector	■	Disabled	[Disabled]	This option cannot be changed when Auto is selected. Specify the num-
Transfers:	■	2 Sectors		ber of sectors per block for multiple sector transfer.
	■	4 Sectors
	■	8 Sectors
	■	16 Sectors
LBA Mode	■	Disabled	[Disabled]	Enables or disables Logical Block Addressing in place of Cylinder, Head,
Control:	■	Enabled		Sector addressing. This option cannot be changed when Auto is selected.

7