Fujitsu S7220 - page 44

39
Setting Supervisor Password
You must have set a supervisor password before setting any user passwords. The supervisor password can
bypass the user password.
1Go to the Start menu.
2Select All Programs.
3Select Accessories, then select Run.
4Type in: C:\Program Files\Fujitsu\Security Panel Application\Supervisor\FJSECS.EXE,
then press [Enter]
5Follow the on-screen instructions to set the Supervisor password.
Setting User Password
1Go to the Start menu.
2Select All Programs.
3Select Security Panel Application and Set User Password.
4Follow instructions to set the user password.
Operating Your LifeBook Security/Application Panel
The security lock feature is in effect both when the system resumes from Off or sleep state. You will need
to enter the user password right after pressing the Suspend/Resume button. Your system will not boot or
resume from Sleep without entering your supervisor/user password.
From Off State
1Turn on your system.
2When the Security Indicator flashes, enter the password and press [Enter] button. For example, if the password
is 22222, press button number [2] five times and press [Enter] button.
3The notebook will boot to normal operation.
YOU MAY CHANGE OR REMOVE THE SUPERVISOR OR USER PASSWORD BY REPEATING THE STEPS
DEFINED ABOVE.