80
7Insert the memory upgrade module at a 45° angle. Press the connector edg e of the module firmly down and
into the connector until it lodges under the retaining clip. You’ll hear a click when it is properly in place.
8Replace the cover and reinstall the screws.
Removing a Memory Upgrade Module
1Perform steps 1 through 4 of Installing a Memory Upgrade Module.
2Pull the clips sideways away from each side of the memory upgrade module at the same time.
Figure 22. Opening Memory Compartment Figure 23. Installing a 2nd Memory Module
2
2
1
Retaining Clip Alignment Key
THE MEMORY UPGRADE MODULE IS NOT SOMETHING YOU ROUTINELY REMOVE FROM YOUR NOTEBOOK.
ONCE IT IS INSTALLED, YOU CAN LEAVE IT IN PLACE UNLESS YOU WANT TO CHANGE SYSTEM MEMORY
CAPACITY.