1 Overview
1.1Abstract
The SK-TSC-1125S Starter Kit allows easy evaluation of the FMA1125 Touch Sensor Controller. It consists of the following parts:
•1x SK-TSC-1125S-TB touch board with FMA1125 TSC
•1x ADA-16FX-TSC-LCD
•1x 10-pin ribbon cable
•3x FMA1125DC-24S Sample
•In order to use the free example software, an SK-16FX-EUROSCOPE Starter Kit is required as host system, which has to be ordered separately. In this case, the included ADA-16FX-TSC-LCD and ribbon cable can be used to connect both PCBs.
•The SK-TSC-1125S-SB itself can alternatively be connected to any suitable host PCB using appropriate connections.
A demo firmware allows direct evaluation of the touch sensor, and provides various commands to tune the TSC parameters using a command-line interface and a terminal program. The newest version of the demo firmware, the SK-Wizard (the recommended terminal program) and additional information can be downloaded from the TSC product page:
http://www.fujitsu.com/emea/services/microelectronics/tsc/
This manual will describe the behaviour when used with the above demo firmware where needed (e.g. tuning with command line interface). Of course the Starter Kit itself can also be used with different host software and / or hardware combinations.
This evaluation system must only be used for test applications
in an evaluation laboratory environment!
© Fujitsu Microelectronics Europe GmbH | - 5 - |
