Fujitsu SP600C Step C Installing the drivers from the Setup CD, Installing the STI-Twain driver

Fujitsu SCSI Scanner Installation Procedures

Windows 95\98\98SE\ME\2000\XP

11.For Windows 2000 or XP scroll down to the “Enter key word or quoted phrase” box and type in “aspi”.

12.Next scroll down to the drivers section, click on ASPI_v470 or higher and follow the prompts to download it.

13.Afterwards go to that folder and unzip the file to the default Adaptec\ASPI folder.

14.Then go to start, run, browse to the Adaptec\ASPI folder, select ASPIINST.EXE and run it.

15.When the message “ASPI is up to date” appears, reboot and go to the next step.

Step C: Installing the drivers from the Setup CD.

To begin it is recommended that you install the drivers first before connecting the scanner.

Installing the STI-Twain driver.

1.Insert the Scanner Setup CD into your CD Rom.

2.Next please complete the pre-registration box when it appears and click the submit button.

3.Afterwards close your browser and click the Install Products button on the Scanner Setup Menu.

4.On the next screen click on Twain Driver and you may be presented with the option to install the Error Recovery Guide.

5.After you have installed the Error Recovery Guide (or not) follow the prompts to complete the twain driver installation.

6.Do not reboot at this time!

Installing the ASPI-Twain driver.

Some of our scanners are not supported by the STI-Twain drivers. For those units you must install the ASPI-Twain driver. Please refer to the driver download page to see if your model is one of them.

7.Insert the Scanner Setup CD into your CD Rom.

8.Next please complete the pre-registration box when it appears and click the submit button.

9.Afterwards close your browser and click the Install Products button on the Scanner Setup Menu.

10.On the next screen click on Twain Driver and you may be presented with the option to install the Error Recovery Guide.

11.After you have installed the Error Recovery Guide (or not) follow the prompts to complete the twain driver installation.

12.Do not reboot at this time!

Installing the ISIS driver.

13.Next go back to the Scanner Setup Menu and click on ISIS Driver.

14.If you didn’t install the Error Recovery Guide during the Twain driver installation you will be asked again. Proceed and follow the prompts to complete the ISIS driver installation.

15.Do not reboot at this time!

Rev051906A Page 2 of 7