Fujitsu manual Removing the Stylistic, Adjusting the Stylistic 3400’s Viewing Angle

Figure 5. Installing the Stylistic 3400

5.Turn on the peripherals attached to the mini-dock.

6.Press the Suspend/Resume button to resume Stylistic 3400 system operation.

Note: If the required driver software for a connected peripheral device is not installed, the device may not work or may work incorrectly. Contact your local help desk or refer to the documentation provided with your peripheral device and install the driver software at this time.

You can now use your Stylistic 3400 with the peripheral devices connected to the mini-dock.

Removing the Stylistic 3400

Follow these steps to remove your pen tablet.

1.Suspend operation of your Stylistic 3400 by pressing the Suspend/Resume button or by shutting down from the Start menu.

2.Turn off peripheral devices that are connected to the mini-dock.

3.Hold the base of the mini-dock with one hand, and with your free hand, firmly hold and pull the Stylistic 3400 out of the mini-dock in a straight line.

4.Press the Suspend/Resume button to resume operation of your Stylistic 3400.

Adjusting the Stylistic 3400’s Viewing Angle

Your mini-dock allows you to adjust your Stylistic 3400 to a comfortable viewing angle. There are five positions on the stand to which you can adjust the viewing angle of your pen tablet. (Figure 6.)

Metal

Bail

Stand

Figure 6. Adjusting the viewing angle

To adjust your pen tablet’s viewing angle:

1.Release the metal bail from the stand by firmly pulling it up from the groove on the stand.

2.With one hand, hold and adjust the pen tablet to your desired viewing angle; use your free hand to position the metal bail in the appropriate groove on the stand, then press until it snaps in place.

Stylistic 3400 is a trademark of Fujitsu PC Corporation © 2000 Fujitsu PC Corporation

3/00 3 of 3 58-0712-00A