Hard Disk Security Submenu of the Security Menu

L i f e B o o k T S e r i e s T a b l e t P C

The Hard Disk Security Submenu is for configuring hard disk security features.

F1 Help	Select	Item	-/Space	Change	Values
ESC Exit	Select	Menu	Enter	Select	▲ Sub-Menu

Figure 14. Hard Disk Security Submenu

F9 Setup Defaults

F10 Save and Exit

Table 14: Fields, Options and Defaults for the Hard Disk Security Submenu of the Security Menu

Menu Field	Options		Default	Description

Serial ATA	---		---	A display-only field. Set is displayed when the Serial ATA Port 0 Password is set
Port 0				and Clear when it is not.
Password Is:

Primary	---		---	A display-only field. Not Available is displayed.
Master Pass-
word Is:

Set Serial	---		[Enter]	Sets, changes or cancels Serial ATA Port 0 Password. The password may be up to
ATA Port 0				seven characters long and include only letters or numbers (no symbols). Pass-
Password				words are NOT case- sensitive. To cancel a password press the Enter key instead
				of entering characters in the Enter New Password field and in the Re-enter New
				Password field. When a Serial ATA Port 0 Password is set it must be used to access
				the hard disk. Data on the hard disk cannot be read on other systems.

Set Primary	---		[Enter]	Not currently available.
Master
Password

Password	■	Disabled	[Enabled]	When this is disabled, it is not necessary to enter the password before boot-
Entry on Boot:	■	Enabled		ing.The hard disk is still password-protected without entering a password.