Fujitsu U810 manual Drive0 Submenu of the Main Menu

L i f e B o o k U 8 1 0 N o t e b o o k B I O S

Drive0 Submenu of the Main Menu

The Drive0 submenu identifies which ATA devices are installed.

		PhoenixBIOS Setup Utility
Main	Advanced	Security			Power	Boot	Info	Exit
	Drive0 [TOSHIBA MK4007GAl]							Item Specific Help
Type:							Select Serial ATA/IDE
				[Auto]
		LBA Format					drive installed here.
Total Sectors:			78140160				[Auto]
Maximum Capacity:			40008MB
							The BIOS auto-types the
Multi-Sector Transfers:			[16 Sectors]				drive on boot time.
LBA Mode Control:			[Enabled]				[None]
Transfer Mode:			[Multiword DMA 2]
Ultra DMA Mode:			[Disabled]				The drive is disabled.

F1 Help	Select	Item
ESC Exit	Select	Menu

-/SpaceChange Values

Enter Select ▲ Sub-Menu

F9 Setup Defaults

F10 Save and Exit

			Figure 2. Drive0 Submenu
Table 2: Fields, Options and Defaults for the Drive0 Submenu of the Main Menu
Menu Field	Options		Default	Description
Type:	■	Auto	[Auto]	Select [Auto] to have the type of Serial or Parallel ATA device automatically
	■	None		identified by the BIOS at POST. If [None] is selected, the following Set-up
				items do not appear.
LBA Format				Logical Block Addressing (LBA)
Total Sectors:	---		---	The total number of sectors on your hard disk. This information is automati-
				cally displayed when [Auto] is selected.
Maximum	---		---	The maximum capacity of your hard disk. This information is automatically
Capacity:				displayed when [Auto] is selected as the Type.
Multi-Sector	■	Disabled	[16 Sectors]	This information is automatically selected when [Auto] is selected as the Type.
Transfers:	■	2 Sectors
	■	4 Sectors
	■	8 Sectors
	■	16 Sectors
LBA Mode	■	Disabled	[Enabled]	Enables or disables logical Block Addressing in place of Cylinder, Head, Sector
Control:	■	Enabled		addressing. This setting is automatically selected when [Auto] is selected as
				the Type.

6