Hard Disk Security Submenu of the Security Menu

S e c u r i t y M e n u

The Hard Disk Security submenu is for configuring hard disk security features.

		Phoenix TrustedCore(tm) Setup Utility
Info	System	Advanced		Security	Boot	Exit

	Hard Disk Security					Item Specific Help

Drive0:			Clear
Set Master Password			[Enter]
Set User Password			[Enter]
Password Entry on Boot:			[Enabled]

F1 Help	Select	Item	-/Space	Change	Values
ESC Exit	Select	Menu	Enter	Select	▲ Sub-Menu

Figure 14. Hard Disk Security Submenu

F9 Setup Defaults

F10 Save and Exit

Table 14: Fields, Options and Defaults for the Hard Disk Security Submenu of the Security Menu

Menu Field	Options		Default	Description


Drive0:	___		Clear	Display-only. Default is Clear. When the Drive0 Password has been set,
				the field changes to Set. When this password is set, the primary hard disk
				drive cannot be used in another system unless the password is entered.

Set Master	___		[Enter]	Sets, changes or cancels the Master Password. The Master Password may
Password:				be up to seven characters long and must include only letters or numbers
				(no symbols). Passwords are NOT case-sensitive. When a Master Pass-
				word is set, it must be used to access the hard drive if it is used in another
				system. Note that the password will not take effect until the system has
				been rebooted.

Set User	___		[Enter]	Sets, changes or cancels the User Password. The User Password may be
Password:				up to seven characters long and must include only letters or numbers (no
				symbols). Passwords are NOT case-sensitive. When aUser Password is
				set, it must be used to access the hard drive if it is used in another system.
				Note that the password will not take effect until the system has been
				rebooted.

Password Entry	■	Disabled	[Enabled]	When set to disabled, entry of a Hard Disk Password is not required
on Boot:	■	Enabled		before OS boot. (The hard disk is still password-protected without pass-
				word entry.)