Installing your display unit
1.
2.
3.
WARNING!
Before you start cabling your display unit, check that the power is off on all units. To avoid any possibility of electric shock, always connect your equipment to properly earthed outlets.
The base of the display is already installed; do not use the monitor withour it. Place the display unit on a level and sturdy surface.
Connect the display unit’s signal cable (a) to the system unit and scure it with the two screws. The connector pins may be protected against damage by a plastic cover which needs to be removed first.
Plug the display unit’s power cable (b) first to the back of the display unit, as shown below.
4. Then plug the power cable (b) to a
English
6
