Fujitsu XG0448 Requirements for Installation Environment, Installation Requirements, Humidity %RH

XG0448 Hardware Guide Chapter 2 Installation

2.1Requirements for Installation Environment

Before installing the switch, please check the following:

•Make sure that the switch and all the other options shown in this document are available for installation.

•All the cables comply with the specifications of the interface connectors.

Warning

Do not connect cables to interface connectors other than those adaptable to the connector’s specifications.

Reference "1.1.1 Parts List" (pg.18)

Install the product under the following environmental conditions

2.1.1Installation Requirements

Caution

Install the product under the following conditions. Using the product outside the required environment may cause failure of the product.

Temperature and Humidity Requirements

	Temperature (degrees C)	Humidity (%RH)
Operation	0 to 40	15 to 85
Non-operation	0 to 50	8 to 90

Power Requirements

Item	Requirements
Voltage	AC90-264V (*)
Frequency	50Hz / 60Hz +2%, -4%
Ground	Separate ground wire from air conditioners and building, and D-class grounding with
	ground resistance of 100 Ω or less.
Electricity	133.1W
	Maximum50A
Inrush Current	Ensure installation environment that avoids lowering voltage to power supply
	equipment at the time of power-on due to the inrush current, although there’s no
	impact from the inrush current in normal use.

28 Requirements for Installation Environment