Fujitsu Siemens Computers C551 manual VESA-DDC-compatible VGA interface, Preset operating modes

Color monitor C551

Electrical data
Video:	analog, positive, 0.7 Vpp, 75 Ohm
Synchronization:	TTL
Horizontal frequency:	30 kHz .... 54 kHz (multi-scanning)
Refresh rate:	50	Hz .... 120 Hz
Maximum pixel rate:	70	MHz
Power supply:	100 V - 240 V ± 10%
	60	Hz/50 Hz ± 3 Hz, < 1.5 A
Power consumption (see power	< 65 W (ON, Normal mode)
management):	< 15 W (Standby mode)
	< 15 W (Suspend mode)
	< 5 W (OFF mode)
Environmental conditions
Environment class 3K2, IEC 721
Rated range of operation:	15	°C .... 35 °C
Humidity:	10 % .... 80 %
Limit range of operation:	0 °C .... 40 °C
Humidity:	10 % .... 80 %
Condensation must be avoided.

VESA-DDC-compatible VGA interface

Your monitor is equipped with a VESA-DDC-compatible VGA interface. VESA-DDC (Video Electronics Standard Association, Display Data Channel) is used as the communications interface between the monitor and the PC. If your PC is equipped with a VESA-DDC-compatible VGA interface, it can automatically read the data for ensuring optimum operation from your monitor and select the appropriate settings.

i	If the monitor C551 is not yet displayed in the list of monitors, you can select one of the
	following monitors instead:
	Fujitsu Siemens 154V or Siemens MCM 153V, MCM 1404, MCM 1405 ND

Preset operating modes

The display position and size have been set to optimum values at the factory for the i operating modes listed above. Depending on the screen controller used, it may be

necessary to adjust the display position and size. In this case, you can change and save the settings (see "Operation of the monitor").

14 - English A26361-K610-Z100-3-5E19