SCENICVIEW P17-2 / P19-2 / P20-2

Setting display of the OSD menu

Language

OSD

H-Position

OSD

V-Position

OSD

Timeout

OSD

Rotation

Calling the OSD Setup setting window

Setting language for the OSD menu

With this function you choose between English (default setting), French, German, Italian and Spanish as the language for the OSD menu.

Setting the horizontal position of the OSD menu

With this function you move the OSD menu to the left or to the right.

Setting the vertical position of the OSD menu

With this function you move the OSD menu up or down.

Setting the display duration of the OSD menu

With this function you select a value from 10 to 120 seconds.

If the set time expires without a setting being made, the OSD menu is automatically faded out.

Setting the display format of the OSD menu

With this function you switch the OSD menu from portrait mode to landscape mode and vice versa.

Off = The OSD menu is displayed in portrait mode.

On = The OSD menu is displayed in landscape mode.

Setting functions in the "Advanced" menu

Calling the Advanced setting window

Input select

Sharpness

Resolution

Notifier

Factory Recall

Selecting input signal

With this function you switch the monitor from the analogue to the digital mode and vice versa, when two signal sources are connected.

The condition is that the graphic card used supports this function.

Adjusting the picture quality in case of interpolation

With this function you set the sharpness of the interpolation filter. Thus the display can be optimised for pictures or texts.

Displaying monitor data

The optimum resolution for this monitor is 1280 x 1024 pixels. With the function activated (On), a message appears on the screen after approx. 30 seconds if a different resolution is set.

Change the resolution to 1280 x 1024 to achieve optimum picture quality. With the function deactivated (Off), no message appears.

Activating the factory settings

With this function all settings are reset to the factory settings without prompting for confirmation.

Press the SELECT/MENU button to activate the function. The Auto Processing message is displayed.

8