FUNAI CR202EM9 5Switching Each Mode, 5Screen Information, Analog Mode, Digital Mode, VIDEO1

Models: CR202EM9

1 52
Download 52 pages 7.62 Kb
Page 13
Image 13

5Switching Each Mode

You can easily switch with the remote control to the DTV (ATSC) and TV (NTSC) or to access an external device when they are connected to the unit.

Press [DTV/TV] repeatedly to change the analog TV or the digital TV.

DTV / TV

ANALOG MODE

 

 

DIGITAL MODE

Note:

When you switch the analog mode to the digital mode, it may take a while until the digital channel selection is completed. The following TV screen is displayed while switching the mode.

NOW SCANNING

Press [INPUT SELECT] repeatedly to cycle through the

DTV

INTRODUCTION

 

In the digital mode, the detailed broadcasting information for the current channel such as program title, the program guides are displayed.

Press [INFO] repeatedly to cycle through the available

CONNECTION

display modes.

 

 

OFF

 

 

INFO

 

 

BROADCASTING INFORMATION

 

 

PROGRAM GUIDE

 

 

INITIAL

[Broadcasting Information]

• The following information is displayed.

SETTING

1

channel number

2

broadcast station

 

3

program title

 

 

4

audio language

 

 

Press [AUDIO] repeatedly to cycle through the

WATCHING

 

available audio languages.

 

(“OTHER” is displayed when the audio language

 

cannot be acquired, or the acquired languages are

 

TV

 

other than English, Spanish or French.)

 

 

input modes.

ANALOG MODE

DIGITAL MODE

INPUT

VIDEO1

SELECT

VIDEO2

2

 

 

 

KABC

CH 25-03

 

 

 

 

3

 

 

 

A Day of Memories

 

 

 

 

 

ENGLISH 1/3

 

 

4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

[Program Guide]

1

OPTIONAL SETTING

To use the video or S-video input jack on the rear of the unit, select “VIDEO1”.

To use the video input jack on the front of the unit, select “VIDEO2”.

5Screen Information

You can display the currently selected channel or other information such as the audio mode on the TV screen.

TV

In the analog mode, the current channel number is displayed.

Press [INFO].

CH 25

INFO

The current channel number is displayed at the top- right corner of the TV screen.

To clear the display, press [INFO] again.

• The program guide added to broadcasting

TROUBLESHOOTING

guide

for 80 percent of the industry’s adverti-

information is displayed.

 

 

 

 

 

KABC

CH 25-03

 

 

 

A Day of Memories

 

 

 

 

 

ENGLISH 1/3

 

 

 

 

 

A quarter-century ago, which may now

 

 

 

program

qualify as the good old days of newsp-

 

 

 

apering, run-of-paper sales accounted

 

 

 

 

 

 

 

 

sing revenues.

 

X Key

 

 

 

Next - Push Vol Y Key

Back - Push Vol

 

 

 

 

 

 

 

 

 

 

Note:

INFORMATION

• When the program guide consists of more than 6 lines, use

 

[VOL X/Y] to scroll.

 

• “No description provided” is displayed when the program

 

guide is not provided.

 

• While the program guide is displayed, the closed caption

 

function is interrupted.

 

• In external input mode, the following screen is displayed;

 

e.g.) When an external device is connected to S-video input

 

jack.

 

 

VIDEO 1

 

 

 

 

 

 

Available languages differ depending on the broadcast.

The information display will automatically disappear in a few seconds when the closed caption is on.

Pressing [AUDIO] does not control external audio source.

13

EN

Page 13
Image 13
FUNAI CR202EM9 owner manual 5Switching Each Mode, 5Screen Information, Analog Mode, Digital Mode, VIDEO1